Minicluster:DRBL:drblsrv
The architecture optimization for your destination computer(s) is set to be the same as this computer.
- .
- .
udev is found in server... The DRBL client will use udev...
- .
- .
Installing kernel for clients... ... In ayo repository...searching for the latest kernel ...
- .
Now run: drblsrv-offline -c -d -a -l en_US.UTF-8 -s 2.6.33.8-149.fc13.x86_64 "" "" Using kernel from this server for client...
- .
Your OS version is:: Fedora 13
- .
Installing kernel for clients... ... The kernel for client is copied from server. Installing kernel 2.6.33.8-149.fc13.x86_64 for clients... It might take several minutes to install this kernel, please be patient... ...done! Generating modules.dep and map files for clients... done! Preparing the kernel firmware for clients...
- .
Creating config file for PXE clients... Copying pxelinux.0, gpxelinux.0, menu.c32, vesamenu.c32, chain.c32, mboot.c32, sanboot.c32 and memdisk to /tftpboot/nbi_img... Copying memtest86+ to /tftpboot/nbi_img... Copying FreeDOS files to /tftpboot/nbi_img/... Generating default pxelinux config (/tftpboot/nbi_img/pxelinux.cfg/default)... Use com32 module: vesamenu.c32 Adding menus for DRBL, local boot, memtest86+, FreeDOS... done!
- .
- .
Creating the image files for PXE and Etherboot client computer(s), this will take a few minutes ... The latest kernel for the DRBL clients is 2.6.33.8-149.fc13.x86_64 Running mknic-nbi --kernel 2.6.33.8-149.fc13.x86_64 --all --no-modules Will client check DHCP server name is "drbl" or not: yes The maximum times to try to get IP address for a client: 5 The pause time after network card is up: 0 The timeout to wait for network card linked (Unit: 0.1 secs): 70 Setting port for udhcpc request to default... Using the kernel modules from /tftpboot/node_root//lib/modules... The selected kernel for DRBL clients is: 2.6.33.8-149.fc13.x86_64 Kernel 2.6 was found, so default to use initramfs. Creating the network boot initrd for PXE clients by: mkpxeinitrd-net -k 2.6.33.8-149.fc13.x86_64 -t initramfs Use kernel modules from /tftpboot/node_root//lib/modules/2.6.33.8-149.fc13.x86_64. Calling hook udev... Creating the initRAMFS image... Initramfs, remove ramdisk_size/ramdisk_block in /tftpboot/nbi_img/pxelinux.cfg/default if exists... Finished! Done!
- .
Done!
